Separating Agent Spray
The EPODEX Separating Agent Spray is ideal for casting applications with epoxy, polyurethane, acrylic and polyester resins. Ideal for applying to smooth GRP and silicone molds and in combination with the EPODEX Separating Tape. Excellent separating and sliding effect. Thanks to the fine spray mist even angled areas can be reached. The 10fl.oz spray is sufficient to cover an area of 53-75sqft. The EPODEX Separating Spray is free of solvents and silicone which prevents silicone residues and minimizes subsequent sanding and polishing work.
Application:
Shake well before use. Spray separating agent thinly and evenly onto the surface to be separated from a range of 8-12″. If even surfaces are required wipe the release film with a soft cloth. Material forms a transparent film after spraying.
Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Danger Statements
DANGER: Propellant: Propane/Butane. Extremely flammable aerosol. Pressurized container: may burst if heated. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe spray. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Without adequate ventilation, the formation of explosive mixtures is possible.
