EPODEX Holographic Glitter Powder Pigment SILVER
EPODEX glitter powders are ideally suited for use in casting and laminating resins (including epoxy, polyester, and polyurethane resins) and many other applications.
Application in epoxy resins
- Mix the glitter powders with the resin (A-component) or with the resin-hardener mixture.
- Recommendations for high coverage: approx. 1.5% glitter powder by weight on total amount of resin and hardener (e.g. 15g(0.53oz) color powders for 32oz resin+hardener).
- Recommendations for low coverage: approx. 0.5% glitter powder by weight on total quantity of resin and hardener (e.g. 5g(0.18oz) color powders for 32oz resin+hardener).
- Adjust the intensity of the effect individually by adding more or less pigment.
Caution: Due to their size, the glitters sink in liquid resin. To prevent sinking, sprinkle the glitter over the poured and gelled resin-hardener mixture and stir it in gently. Alternatively, you can pour the epoxy in several layers and sprinkle on the glitter powders. The gelling time varies among the epoxy resin systems. Therefore, check the consistency before sprinkling on the glitter powder.
To disperse pigments that have already sunk, adjust the gelling time and mix the resin-hardener mixture carefully. Make sure that mixing does not create air bubbles, as these will not escape in the gelled resin-hardener mixture.
Note: Please note that due to different lighting conditions and monitors, the colors may not be uniformly displayed. All information is recommendations based on our experience; without legal obligation.
Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
