Metallic Floor Paint - FLAME COPPER

Get the service you deserve!

✓ Guaranteed hassle-free shopping experience.
✓ No surprises. You always get the color you see online. We present all our colors in 4K videos and high-resolution pictures so you can see exactly what you are getting.
✓ Professional easy to follow step-by-step tutorials.
✓ Money-Back Guarantee
✓ Same Day Shipping
✓ Delivery across USA
✓ Friendly 24h-Support

Instructions for Use

Priming with PRIMER

1. We recommend a working temperature of approx. 70°F.
2. The surface should be dust-free, clean, and even. Level out holes, unevenness, and slopes in advance with leveling compound.
3. Always start with our PRIMER.
4. Mix the primer thoroughly and dye it with the supplied WB Pigment RAL 7016 Anthracite Gray.
5. Pour the colored primer into a paint tray after mixing.
6. Apply the colored primer on the desired surface with a paint roller.
7. Allow the colored primer to dry (approx. 8-12 hours).

Main Coating with EFFECT PAINT

1. Use our EFFECT PAINT for the maint coat.
2. Mix the supplied EFFECT PAINT with the supplied metallic pigment FLAME COPPER.
3. Paint the FLAME COPPER EFFECT PAINT in a criss-cross pattern onto the primed surface with a paint roller. The primer should remain a bit visible to achieve the desired effect.
4. The paint is dust-dry after approx. 5 hours.

Sealing with PU

1. Coat the surface with the PU resin.
2. To do this, mix the PU resin (A) with the appropriate PU hardener (B) in the specified mixing ratio. PU matte: 10:1 by weight (e.g.: 1lb A + 0.1lb B). Optionally, you can add up to 20% water.
3. Transfer the mixture to a paint tray and mix again. This way you make sure that resin (A) and hardener (B) mix completely.
4. We recommend mixing smaller quantities of approx. 2lbs per coat, as the material, is very reactive and sets quickly (pot life: 60 min. with 2lbs).
5. Apply the material thinly with a foam roller in a criss-cross pattern. To achieve an even finish, use our scraper grid to scrape off excess material before application. The layer should be as thin as possible.
6. The material can be walked on after approx. 20-24 hours and is completely chemically cured after approx. 7 days.

Pro Tip: We recommend adding water to the PU resin when working at high ambient temperatures or when mixing a large quantity to avoid an orange peel texture.

Consumption volumes

Recommended thicknesses when coating floors and other surfaces

• Overall coating (primer + main coating + sealing): approx. 1-1.25oz/sqft
• Primer: approx. 0.4-0.5oz/sqft
• Main layer: approx. 0.35-0.45oz/sqft
• Sealing: approx. 0.3oz/sqft

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Ingredients, Security & Danger statements

A-Components (PU Matte) Contains: N-BUTYL METHACRYLATE: May produce an allergic reaction. Mixture of: a -3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-x-hydroxypoly(oxyethylene); a -3-(3-(2Hbenzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-x-: May cause an allergic reaction. Decanedioic acid, bis(1,2,2,6,6-pentametyl-4-piperidinyl) ester: May cause an allergic reaction.

B-Components (PU Matte) Warning: Hexamethylene diisocyanate oligomers Benzene, 1,3-diisocyanatomethyl-, polymer with 1,6-diisocyanatohexane, polyethyl hexamethylene-di-isocyanate: May produce an allergic reaction. Harmful if inhaled. Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. Call a POISON CENTER/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains isocyanates. May produce an allergic reaction.

B-Components (PU Glossy) Warning: Hexamethylene diisocyanate oligomers Benzene, 1,3-diisocyanatomethyl-, polymer with 1,6-diisocyanatohexane, polyethyl hexamethylene-di-isocyanate: May produce an allergic reaction. Harmful if inhaled. Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. Call a POISON CENTER/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains isocyanates. May produce an allergic reaction.

METALLIC BRUSH EFFECT Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/mist/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.

PRIMER Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.