Get the service you deserve!
✓ Guaranteed hassle-free shopping experience.
✓ No surprises. You always get the color you see online. We present all our colors in 4K videos and high-resolution pictures so you can see exactly what you are getting.
✓ Professional easy to follow step-by-step tutorials.
✓ Money-Back Guarantee
✓ Same Day Shipping
✓ Delivery across USA
✓ Friendly 24h-Support
Instructions for Use
Priming with PRIMER
- We recommend a working temperature of approx. 70°F.
- The surface should be dust-free, clean, and even. Level out holes, unevenness, and slopes in advance with leveling compound.
- Always start with our PRIMER.
- Mix the primer thoroughly and dye it with the supplied WB Pigment RAL 7035 Light Gray.
- Pour the colored primer into a paint tray after mixing.
- Apply the colored primer on the desired surface with a paint roller.
- Allow the colored primer to dry (approx. 8-12 hours).
Main Coating with EFFECT PAINT
- Use our EFFECT PAINT for the maint coat.
- First, mix half the supplied EFFECT PAINT with the supplied metallic pigment PLATINUM SILVER.
- Then, mix the other half of the supplied EFFECT PAINT with the supplied metallic pigment PEARL WHITE.
- Paint the PLATINUM SILVER EFFECT PAINT in a criss-cross pattern onto the primed surface with a paint roller.
- Paint the PEARL WHITE EFFECT PAINT wet on wet on the PLATINUM SILVER EFFECT PAINT in a criss-cross pattern with a paint roller. The primer should remain a bit visible to achieve the desired effect.
- The paint is dust-dry after approx. 5 hours.
Sealing with PU
- Coat the surface with the PU resin.
- To do this, mix the PU resin (A) with the appropriate PU hardener (B) in the specified mixing ratio. PU matte: 10:1 by weight (e.g.: 1lb A + 0.1lb B). Optionally, you can add up to 20% water.
- Transfer the mixture to a paint tray and mix again. This way you make sure that resin (A) and hardener (B) mix completely.
- We recommend mixing smaller quantities of approx. 2lbs per coat, as the material, is very reactive and sets quickly (pot life: 60 min. with 2lbs).
- Apply the material thinly with a foam roller in a criss-cross pattern. To achieve an even finish, use our scraper grid to scrape off excess material before application. The layer should be as thin as possible.
- The material can be walked on after approx. 20-24 hours and is completely chemically cured after approx. 7 days.
Pro Tip: We recommend adding water to the PU resin when working at high ambient temperatures or when mixing a large quantity to avoid an orange peel texture.
Consumption volumes
Recommended thicknesses when coating floors and other surfaces
- Overall coating (primer + main coating + sealing): approx. 1-1.25oz/sqft
- Primer: approx. 0.4-0.5oz/sqft
- Main layer: approx. 0.35-0.45oz/sqft
- Sealing: approx. 0.3oz/sqft
Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Ingredients, Security & Danger statements
A-Components (PU Matte) Contains: N-BUTYL METHACRYLATE: May produce an allergic reaction. Mixture of: a -3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-x-hydroxypoly(oxyethylene); a -3-(3-(2Hbenzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-x-: May cause an allergic reaction. Decanedioic acid, bis(1,2,2,6,6-pentametyl-4-piperidinyl) ester: May cause an allergic reaction.
B-Components (PU Matte) Warning: Hexamethylene diisocyanate oligomers Benzene, 1,3-diisocyanatomethyl-, polymer with 1,6-diisocyanatohexane, polyethyl hexamethylene-di-isocyanate: May produce an allergic reaction. Harmful if inhaled. Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. Call a POISON CENTER/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains isocyanates. May produce an allergic reaction.
B-Components (PU Glossy) Warning: Hexamethylene diisocyanate oligomers Benzene, 1,3-diisocyanatomethyl-, polymer with 1,6-diisocyanatohexane, polyethyl hexamethylene-di-isocyanate: May produce an allergic reaction. Harmful if inhaled. Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. Call a POISON CENTER/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains isocyanates. May produce an allergic reaction.
METALLIC BRUSH EFFECT Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/mist/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.
PRIMER Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.
