Microcement Set for Tiles incl. Putty Primer or 2K Leveling Compound

10%
OFF
microcement over tiles set
microcement set for tiles kitchen sage epodex
microcement set for tiles bath mocca epodex
microcement set for tiles kitchen traffic white epodex
microcement set for tiles kitchen finca epodex
microcement set for tiles bath grass green epodex
microcement set for tiles bath berry epodex
microcement set for tiles bath traffic white epodex
1 / 8
slide 1 to 5 of 8
  1. microcement over tiles set
  2. microcement set for tiles kitchen sage epodex
  3. microcement set for tiles bath mocca epodex
  4. microcement set for tiles kitchen traffic white epodex
  5. microcement set for tiles kitchen finca epodex

Microcement Set for Tiles incl. Putty Primer or 2K Leveling Compound

Premium quality microcement for all types of indoor and outdoor tiles. For wall tiles and floor tiles in kitchens, bathrooms, hallways and more

11 reviews
$149.98 $134.98
Delivery time: 1-3 business days | Free shipping on orders over $50
  • Design Leveling compound for tiles
  • Material: Microcement powder (A-component) and liquid acrylic resin (B-component), as well as Putty Primer or 2K Leveling Compound
  • Properties: High load-bearing capacity, weatherproof, UV-stable, odorless
  • Areas of application: Interior & exterior as well as damp rooms with PU sealant
  • Curing time per layer at 70°F: approx. 8h
  • Scope of delivery for 37sqft wall: 15.4lbs medium-grained powder+ 4.4lbs liquid acrylic resin + WB Pigment + 11lbs Putty Primer
  • Scope of delivery for 48sqft floor: 15.4lbs large microcement + 15.4lbs medium-grained powder + 8.8lbs liquid acrylic resin + WB Pigment + 35.2lbs 2K Leveling Compound
  • Application instructions on this product page.
Product Properties
Application
Product Description Microcement, nano concrete, design levelling compound
Area of Application Area of Application almost any walls and floors, furniture, facades, stairs, industrial halls, cellars etc.
Field of Application Indoor & Outdoor use and damp rooms
Method of application Trowel
Self-levelling minimal; must be spread and smoothed out with a trowel
Consumption Quantity Floor Layer 1 (large-grained): 0.32lb/sqft, Layer 2 (medium-grained): 0.24lb/sqft
Consumption Quantity Wall Layer 1 (medium-grained): 0.24lb/sqft, Layer 2 (medium-grained): 0.24lb/sqft
Odour development during application Low (according to amine)
Spray and Drip Behaviour Depending on processing consistency, dripping possible on wall surfaces
Application Temperature Substrate and ambient temperature must be min. 50°F and max. 85°F
Optimum Processing Temperature 70°F
Mixing ratio by weight Powder (A): Liquid (B) Medium: 100:20, Large: 100:25
Recommended layer thickness Medium and large 1/16"
Recommended number of layers min. 2 layers
Waiting time between layers max. 24 hours
Waiting time before painting over with another product (i.e. PU Sealant) after 48 hours
Primer on absorbent, even substrates Deep Primer recommended
Primer on non-absorbent, even substrates 2K Bonding Primer
Leveling and priming of floors 2K Leveling compound
Leveling and priming of walls Putty Primer
Max. humidity level during application 60%
Technical Properties
Material Base Cement
Component A Powder for Microcement and Quartz
Component B Acrylic Resin in Water Dispersion
Gloss Level Satin; Matte finish possible with PU sealer
Consistency High viscosity, viscosity can be adjusted depending on the amount of LIQUID (B) added.
Coverage Highly Opaque
Surface Finish Highly durable, abrasion-resistant, hard-wearing, scrub-resistant
Scratch Resistance/Abrasion Resistance Reinforced by the application of PU and recommended for heavily used surfaces and wet areas
Compressive Strength after 7 days ≥ 12.0 MPa (EN 13892-2)
Compressive Strength after 28 days ≥ 20 MPa (EN 13892-2)
Flexural Strength after 7 days 4.0 MPa (EN 13892-2)
Flexural Strength after 28 days 7.0 MPa (EN 13892-2)
Fire resistance class Efl EN 13501-1
Shore Hardness ≥80
Elasticity1 Not elastic; glass fibre mesh must be incorporated on substrate susceptible to vibrate
Open to diffusion, breathable Yes (unless extra PU sealant are applied)
Application in Wet Areas Not recommended without PU sealant in wet areas
Color Fastness High
Color Intensity High
Grain Finish Medium
UV-resistant UV-Stable
Solvent-Free Yes
Plasticiser-Free Yes
VOC-Free Yes
Susceptible to abrasion marks and gloss spots (so-called writing effect) Low (Touch-Protect-System)
Environmentally Friendly Yes
Pigment Content 2-10% depending on desired color intensity, recommended 2%
Density (oz/inch³) 182 - 1295oz/inch³
Maximum Grain Size Large (450µm), Medium (330µm)
Dilutable Medium: max. 100:23, large: max. 100:28
Tool Cleaning Tool Cleaning Immediately after use with acetone/thinner
Chemical Resistance Acids, alkalis and chlorine should be avoided
Surface Cleaning Light surfactants (do not use acidic or chlorinated cleaners or alkaline solutions)
Storage Temperature Airtight, cool, dry, and frost-free
Max. Storage Temperature 75°F
Min. Storage Temperature 50°F
Minimum Shelf Life Unopened 12 months, Open 6 months
  1. If the substrate presents expansion joints, these must be taken into account when applying microcement. The expansion joint must either be reinforced with fibre glass mesh or a joint must be included into the microcement. Rooms larger than 535sqft should always include expansion joints. Ignoring existing expansion joints or not including them when needed can lead to the microcement cracking.
    • $0.00
Options amount
$0.00
Final total
$149.98 $134.98
Add Accessories
SKU: sys-micro-primer Categories: ,

Microcement Seemless Design

EPODEX Microcement is a special easy-to-apply leveling compound. It can be applied onto floors, walls, stairs, table, and more! Acchieve a unique, comtemporary interior decor in no time. From exposed concrete wth natural cavities to multi-colored designs with 3D effect - Everything is possible!

Universally Applicable

Our microcement is suitable for indoor and outdoor use and can be applied to almost all substrates such as parquet, tiles, natural stone, plasterboard, metal, ceramic, marble, OSB and more. The material is highly resilient and UV-resistant. At the same time, it remains flexible and breathable.

Completely Waterproof

EPODEX microcement in combination with our polyurethane resin (PU) sealant is waterproof and weather resistant. It is therefore ideal for showers and outdoor areas. The sealing layer is finally rolled onto the hardened microcement.
pu polyurethane resin matte
Add Accessories
Linkedin Whatsapp Mail
Related products
×

Microcement Set for Tiles incl. Putty Primer or 2K Leveling Compound has been added to your cart.

There are 0 items in your cart.

View cart Checkout